WIFI Booter 1.1
WiFi Booter is a PXE-based application, one of the many ways you can boot a complete PC over a network without using any RAM on the target machine. WiFi Booter allows you to select very weak WiFi signals to connect to, meeting the minimum threshold set by your iPad, iPhone, or iPod Touch.
Normally, Wi-Fi signals fall below the minimum threshold and won't appear in the Wi-Fi settings by default. However, after jailbreaking, you can enable them and see additional networks with very low signal strength. WiFi Booter is the configuration application that enhances the Wi-Fi network list, displaying all available networks by removing the signal level limit. This allows you to connect to multiple networks, similar to a Wi-Fi scanning application.
Features:
- The network list item has also been improved to show the BSSID (AP MAC address) and RSSI (signal level) for each network.
- The improvements are for the network list
- Wi-Fi App Settings.
- It can be used for almost anything.
- Run a complete operating system offline using only RAM.
- Mass-install/Update an operating system stored on the local hard drive.
- Recovery – System / Data. (Like Windows login when you've forgotten your password)
- Hardware (Memory Test, hard drive diagnostics).
How to boot your PC with WiFi-Booter:
- Make sure your iPhone or iPod Touch can use the WiFi network.
- WiFi-Booter Launch.
- Tap the settings button and then configure the DHCP options: first IP address, router (gateway), DNS.
- Switch on service by touching the power button in the application.
- Power on your PC, make sure it's connected to the same network, then set the BIOS to boot from the network.
What's new in version 1.1?
- Add FTP support.
- You can modify the boot image files via FTP.
http://www.filesonic.com/file/2253612554
